Residual Solvent Analytes

Home/Analytical/Residual Solvent Analytes

Residual Solvent Analytes

This package contains the analyte group “Residual solvents”, containing 66 analytes regarding known residual solvents. Also two relevant tests are imported (together with their relevant units) to determine the analyte’s concentration and its particle count.

The package contains the following entities:

  • One analyte group: Residual solvents
    • 66 analytes:
      • 1,1-Dichloroethene
      • 1,2-Dichloroethane
      • 1,2-Dimethoxyethane
      • 1,4-Dioxane1-Butanol
      • 1-Pentanol1-Propanol
      • 2,2-Dimethylbutane
      • 2,2-Dimethylpropane
      • 2,3-Dimethylbutane
      • 2-Butanone
      • 2-Butanol
      • 2-Methyl-1-propanol
      • 2-Ethoxyethanol
      • 2-Methylbutane
      • 2-Methylpentane
      • 2-Propanol
      • 3-Methyl-1-butanol
      • 3-Methylpentane
      • Acetic acid
      • Acetone
      • Acetonitrile
      • Anisole
      • Benzene
      • Butane
      • Butyl acetate
      • Carbon tetrachloride
      • Chloroform
      • Cyclohexane
      • Dichloromethane
      • Diethyl ether
      • Dimethyl sulfoxide
      • Ethanol
      • Ethyl acetate
      • Ethyl ether
      • Ethyl formate
      • Ethylbenzene
      • Ethylene glycol
      • Ethylene oxide
      • Formic acid
      • Isobutane
      • Isobutyl acetate
      • Isobutyl alcohol
      • Isopropyl acetate
      • Isopropyl alcohol
      • Isopropylbenzene
      • Methanoic acid
      • Methanol
      • Methyl acetate
      • Methylethyl ketone
      • Methylene chloride
      • N,N-Dimethylacetamide
      • N,N-Dimethylformamide
      • Heptane
      • Hexane
      • Pentane
      • Naphtha
      • Petroleum ether
      • Propane
      • Propyl acetate
      • Pyridine
      • Sulfolane
      • Tert-Butylmethyl ether
      • Tetrahydrofuran
      • Toluene
      • Trichloroethene
      • Triethylamine
      • Xylenes
  • Two tests:
    • Analyte concentration (datatype = quantity and dimension = concentration)
    • Analyte particles count (datatype = quantity and dimension = scalar)

How to use the package

Once installed, the analytes will be available in the Analytes module. If a test -which was configured to require an analyte- is run on content, an analyte needs to be selected.

Where to Look Next

These references have further information on how to configure or use the package contents after the initial installation and integration.

  • SLIMS Administrator Manual: Electronic Lab Notebook > Analytes and Analyte Groups
Category: Tag:

Description

This package contains the analyte group “Residual solvents”, containing 66 analytes regarding known residual solvents. Also two relevant tests are imported (together with their relevant units) to determine the analyte’s concentration and its particle count.

The package contains the following entities:

  • One analyte group: Residual solvents
    • 66 analytes:
      • 1,1-Dichloroethene
      • 1,2-Dichloroethane
      • 1,2-Dimethoxyethane
      • 1,4-Dioxane1-Butanol
      • 1-Pentanol1-Propanol
      • 2,2-Dimethylbutane
      • 2,2-Dimethylpropane
      • 2,3-Dimethylbutane
      • 2-Butanone
      • 2-Butanol
      • 2-Methyl-1-propanol
      • 2-Ethoxyethanol
      • 2-Methylbutane
      • 2-Methylpentane
      • 2-Propanol
      • 3-Methyl-1-butanol
      • 3-Methylpentane
      • Acetic acid
      • Acetone
      • Acetonitrile
      • Anisole
      • Benzene
      • Butane
      • Butyl acetate
      • Carbon tetrachloride
      • Chloroform
      • Cyclohexane
      • Dichloromethane
      • Diethyl ether
      • Dimethyl sulfoxide
      • Ethanol
      • Ethyl acetate
      • Ethyl ether
      • Ethyl formate
      • Ethylbenzene
      • Ethylene glycol
      • Ethylene oxide
      • Formic acid
      • Isobutane
      • Isobutyl acetate
      • Isobutyl alcohol
      • Isopropyl acetate
      • Isopropyl alcohol
      • Isopropylbenzene
      • Methanoic acid
      • Methanol
      • Methyl acetate
      • Methylethyl ketone
      • Methylene chloride
      • N,N-Dimethylacetamide
      • N,N-Dimethylformamide
      • Heptane
      • Hexane
      • Pentane
      • Naphtha
      • Petroleum ether
      • Propane
      • Propyl acetate
      • Pyridine
      • Sulfolane
      • Tert-Butylmethyl ether
      • Tetrahydrofuran
      • Toluene
      • Trichloroethene
      • Triethylamine
      • Xylenes
  • Two tests:
    • Analyte concentration (datatype = quantity and dimension = concentration)
    • Analyte particles count (datatype = quantity and dimension = scalar)

How to use the package

Once installed, the analytes will be available in the Analytes module. If a test -which was configured to require an analyte- is run on content, an analyte needs to be selected.

Where to Look Next

These references have further information on how to configure or use the package contents after the initial installation and integration.

  • SLIMS Administrator Manual: Electronic Lab Notebook > Analytes and Analyte Groups

Additional information

packages

VERSION_6_8:620, VERSION_6_9:672

Title

Go to Top